ENGINE HEATER TT-THERMO 1500KLD

Preces kods: AL14332360

Mēs piegādājam uz
United States

Mēs varam piegādāt šo produktu uz United States un citām valstīm. Piegādes cena ir norādīta iepirkumu grozā.

United States varam nodrošināt dažādas piegādes iespējas. Piegādes datums un maksa ir norādīti iepirkumu grozā.

Varat izsekot savam sūtījumam, izmantojot īpašu izsekošanas saiti, ko saņemsiet uzreiz pēc pasūtījuma apmaksas.
117.50 eur
Cena: 117.50 eur
piegādātājs noliktavā: NĒ
- Paziņojiet par piegādi
  
  interesējošā Jūs prece nav pārdošanā, bet mēs varam Jūs informēt, tiklīdz ta nonāk pārdošanā atkal.
  
  Atstājiet savu tālruņa numuru, lai mēs varētu ar Jums sazināties.
  
  E-pasts *
  Norādiet pareizu e-pasta adresi
  
  Telefons

Power	1500 W
Power cord	DEFA compatible cables
Fluid	Coolant, Glycol - G11, G12
Dimensions	150 mm x 90 mm x 80 mm
Voltage	AC 220-240 V
Frequency	50/60 Hz
Power consumption	6,2 A
Pump throughput capacity	8 l/min
Weight	880g
Connector diameter	⏀16 mm -⏀17 mm
Pipe diameter	⏀16 mm - ⏀20 mm

Apraksts:: The TT-THERMO 1500W KLD model is best suited for use in cars, SUVs and vans over 2500 cubic centimeters. The heater is equipped with an angle connection for the hoses, which allows for more versatility
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm

Kāpēc iepirkties pie mums?

PIEGĀDĀTS VĒL VISEMAZ 1 000 000 PASŪTĪJUMU

Ātra Piegāde visā pasaulē:
90% preču nosūtītas nākamajā darba dienā
Detaļu pārbaude pēc VIN koda
14 dienu naudas atgriešanas garantija
Drošas maksājumu garantija
Klientu personīgie dati ir aizsargāti
Palīdzība detaļu izvēlē

Skatīt visu

Atlaides un pakalpojumi
personīgais menedžeris vairumtirgotājiem un auto pakalpojumiem

15 gadi
tirgū
€200 000
preču vērtība noliktavā
Vairāk nekā 20,000
cilvēku ikdienā meklē produktus ALVADI
Vairāk nekā 5 miljoni
daļas par pieejamām cenām

Collapse

Skaties arī (4)